Occupational Therapy Equipment, Products

IMI-1491 Imico bolsters / rolls / (Set of 5)

The foam padded bolster is covered with bright colour Nylon / Tetron cloth. It has a solid plasticcore & is suitable for Rolling / Rocking exercises.

Comes in following sizes :

(A). Dia. 15cm x 60cm Long
(B). Dia. 20cm x 90cm Long.

(C). Dia. 25cm x 90cm Long
(D). Dia. 30cm x 90cm long

(E). Dia. 40cm x 120cm long

Available individually or in set.

• Size: 16x12 inchs
• Wood: Plastic
• 25 Pegs

• Size: 16x12 inchs
• Pegs: Made of Wood
• With 25 Pegs

• Size: 30cmX 30cm

• Weight approx: 1 kg. Comes complete with bar and collars but without weights.

• Size of Pan: 60cm wide x 120cm long x 60cm high.
• The pan is 20cm deep to hold water or sand.
• Five gardening tools are provided for group activities.

• Size: 70cm X 50cm X 30 cm

• Size: 16x12 inchs
• Pegs: Made of Wood
• 20 Pegs

CPM Shoulder, a micro-computer controlled unit, represents the latest breakthrough in CPM technology. Solid state circuitry control panel with highly visual LED Digital readouts allows passive motions of shoulder joint through prefixed Range of Motion and Time. Unit is fitted on mobile electrical Jack to adjust height according to patient's requirement. Comes with all accessories.

Technical Specification

• Therapy Modes SIX, Mobilization Modes for Continuous, Intermittent and Progressive passive movements.
• Pause Time Programmable Extension/Flexion Pauses from 00 to 99 seconds.
• Treatment Time Programmable from 01 to 99 min.
• Inching Switch Starting position can be set according to the need of patient.
• Memory/Programme 80 Pre-set treatment patterns are stored in memory.
• Open Programmes 20 programmes are Free to store your own patterns.
• Displays. Digital display of ROM settings Pause Time, Treatment Time and Graphic display of Mobilization Modes.
• ROM Setting Programmable from 00 to 180deg. and -90 to +90 degrees for all Shoulder movements.
• Height Adjustment Electrically, by Push button switches.
• Arm Settings Right or Left arm can be set & exercised by little adjustments.
• Patient Safety Patient can stop / Interrupt treatment with hand held switch.
• Power Supply 200-240 V AC at 50-60 Hz.

Varun Knee CPM, a micro-computer controlled unit, represents the latest breakthrough in CPM Technology. Solid state circuitry control panel with highly visual LED Digital readouts allows Flexion and Extension of knee joint through a Prefixed Range of Motion and Time. Proper fit of Calf and Thigh lengths are easily achieved. The Necessary limb support provide comfortable surface for prolonged contact & are washable in cold water. The light weight unit is constructed of Aluminum Sheet & is placed on a movable trolley.

TECHNICAL SPECIFICATION

• Therapy Modes SIX, Mobilization Modes for Continuous, Intermittent and Progressive passive movements.
• ROM Setting Programmable from 00 to 110 deg
• Pause Time Programmable Extension/Flexion Pause from 00 to 99 seconds.
• Treatment Time Programmable from 01 to 99 min.
• Inching Switch Starting angle can be set According to the need of patient.
• Memory/Programme 30 Treatment Protocols can be Programmed & stored in memory.
• Displays Digital display of ROM settings Pause Time, Treatment Time and Graphic display of Mobilization modes.
• Patient Safety Patient Stop/interrupt treatment with hand held switch.
• Trolley Provides Transportation & storage.
• Power Supply 200-240 V AC at 50-60 Hz.able prices

CPM Elbow, A Micro-Computer controlled unit, represents the latest breakthrough in CPM technology. Solid state circuitry control panel with highly visual LED Digital readouts allows Flexion and Extension of Elbow joint through a prefixed Range of Motion and Time. Wrist rotation and Wrist roll movement can also be achieved. Unit is fitted on mobile Electrical Jack to adjust height according to patient requirement. Comes with necessary accessories for Supination / Pronation, Wrist Roll and Elbow passive motions.

TECHNICAL SPECIFICATION:

• Therapy Modes: SIX, Mobilization Modes for Continuous, Intermittent and Progressive passive movements.
• ROM Setting: Programmable from 00 to 120deg for Elbow movements. And -90 to +90 for Wrist movements.
• Pause Time: Programmable Extension/Flexion Pauses from 00 to 99 seconds.
• Treatment Time: Programmable from 01 to 99 min.
• Inching Switch: Flexion or Extension starting position can be set according to the need of patient.
• Memory/Programme: 80 Pre-set treatment patterns are stored in memory.
• Open Programmes: 20 programmes are Free to store your own patterns.
• Displays: Digital display of ROM settings Pause Time, Treatment Time and Graphic display of Mobilization modes.
• Height Adjustment: Electrically, by Push button switches.
• Arm Settings: Right or Left arm can be set & exercised by little adjustments.
• Patient Safety: Patient can stop / Interrupt treatment with hand held switch.
• Power Supply: 200-240 V AC at 50-60 Hz.

• Size: 16x12 inchs
• Pegs: Plastic
• 100 Pegs

• Height: 6"
• Material: Stainless steel
• with stand

Reciprocal, Hand, Elbow & Shoulder Exerciser. Unit consists of two wooden hinged planks and Sanding blocks create resistance for Exercises. Unit is finished in natural wood polish.

SPECIFICATION:

• Upper Plank : 30cm x 100cm high with center divider and with a scale to measure the progress.
• : Upper plank''s angle of inclination can be adjusted from Horizontal to Vertical position.
• : Two pulleys are fitted at the top of upper plank for reciprocal hand-shoulder exercises.
• Lower Plank : 30cm wide with 6 slots to hold upper plank for angle adjustment
• Sanding Blocks : Three sets of sanding hand blocks with different grasp holds & with clip to fix sand-papers.
• Resistance : Resistance can be created by fixing Sand-paper to sanding blocks.
• Construction.: Teak-wood constructed & finished in natural wood polish.