Traction Units, Cervical - Lumbar

• Traction Force: Direct Pulling 5 to 45 kgs. With Double up to 90 kgs.
• Hold Time: 20, 40, 60 & 80 seconds.
• Rest Time: 1, 5, 10 & 20 seconds.
• Treatment Time: 60 minutes with digital display.
• Alarms: At the end of treatment time.
• Safety: Patient safety switch.
• Mounting: Table or Wall mounts.
• Accessories: Cervical Head Holder with Bar, Lumber Traction Belts with Bar, Main Cord & Pulley Doubler.

Akay Hi-Trac, A  micro-computer controlled unit with Eight Traction Modes for LUMBER-CUM-CERVICAL TRACTION is based on solid-state circuitry.  The Three Section fixed Height painted Bed with storage Cabin underneath is an integral part of the unit.

TECHANICAL SPECIFICATION:

* Therapy Modes: EIGHT Traction Modes for either Lumber or Cervical Traction,  in  Progressive, Regressive, Intermittent & Static modes etc. 

* Memory/Programme: "30" Treatment Patterns can be programmed & stored in non-volatile memory. (24 Programmes are feeded and six programs are Free).

* Traction Force: Adjustable from 05 kg to 60 kg.

* Base Force: Adjustable from 00 kg to 54 kg.

* Traction Hold Time: Adjustable from 00 to 99 Sec

* Base Trac Hold Time: Adjustable from 00 to 99 Sec

* Treatment Time: Continuously adjustable from 00 to 99 minutes, with acoustic signal & automatic reduction of traction force.

* Displays: Digital display of Traction Force, Base Force, TF Hold Time, BF Hold Time, Treatment Time & Graphical Display of Trac. Mode.

* Auto-Tension-adjustment: The set traction force is automatically maintained throughout the operation.

TRACTION / PATIENT Safety :

  1, Automatic System Check in Soft-ware on start of traction.

  2, Program Error: Error in programming is displayed / signalled on the panel.

  3, High Force: High-Force Signal is activated if Traction force is set for more than 18kg.

  4, High-Force Acceptance: Acceptance of High Force is required before start of treatment.

  5, Automatic Tension release when emergencies occur. Patient can Stop with hand held switch.

* Couch/Bed: Fixed Height-70mm, foam padded top is divided in Three sections. Head section has an adjustable incline

* Accessories: Adjustable Flexion Stool, Head-Halter, Pelvic & Thoracic Belts.

* Power Supply: 220-240 V AC. (use stabilizer).

• Total weight: 9 kg
• Over Door Model

• Height Adjustment: Electrically, with Hand-switch, from 50cm to 95cm.
• Upholstered Top Size: 195cm long x 70cm wide.
• Sections: Three Sections, drop end section with Nose cut out adjusts from -20 to + 20 deg. Non-friction rolling Lumber section Tilts 60 degree above horizontal.
• Traction Support: Traction unit can be bolted on mounted board, for Cervical and Lumber traction.
• Accessories: Traction Belts, Head-Halter and Flexion stool.
• Power Supply: 220V AC.

• Traction Force: Variable from 4 kg to 60 kg
• Therapy Modes: EIGHT traction modes, Static, Intermittent, Progressive & Regressive etc..
• Hold Time (Traction): Variable from 0 to 99 Sec.
• Rest Time (Traction) : Variable from 0 to 99 Sec
• Treatment Time: Variable from 1 to 99 minutes, with acoustic signal & automatic reduction of traction force
• Display: Digital display of Traction Forces, Times, Modes & Graphical bar & Program number
• Accessories: Head Halter, spreader bar & main lead

• Therapy Modes: EIGHT Traction Modes for either Lumber or Cervical Traction, in Progressive, Regressive, Intermittent & Static modes etc.
• Memory/Programs:30 treatment Patterns can be programmed & stored in non¬volatile memory.(24 Programs are feeded and Six programs are Free).
• Traction Force: Adjustable from 5 kg to 60 kg.
• Speed: Fixed single speed.
• Base Force: Adjustable from 0 kg to 54 kg.
• Traction Hold Time: Adjustable from 0 to 99 Sec
• Base Traction Hold Time: Adjustable from 0 to 99 Sec Treatment Time Continuously adjustable from 0 to 99 minutes, with acoustic signal & automatic reduction of traction force at the end.
• Displays: Digital display of Traction Force, Base Force, Traction Force Hold Time, Base Force Hold Time, Treatment Time & Graphical Display of Traction Mode
• Couch/Bed: Fixed Height-70mm,foam padded top is divided in Three sections. Head section has an adjustable incline
• Traction Pole: Pole with Two adjustable pulleys & rope for giving Cervical Traction in sitting position.
• Accessories : Adjustable Flexion Stool, Head-Halter, Pelvic & Thoracic Belts.
• Auto-Tension : The set traction force is-adjustment. Automatically maintained throughout the operation.
• Patient Safety : Patient Stop, hand held switch.
• Power Supply: 220-240 V AC.(recomended to use stabilizer).

• Pulley Bracket: One, fitted with Two Pulleys and can be fixed to any tubular end bed without bolts or clamps. It is PVC tube protected to prevent marring the paint.
• Pelvic Belt: One, Universal size fits most of the patients; belt is made out of very fine, thick and durable cloth.
• Cervical Holder: One, for cervical traction.
• Spreader Bar: One, bar to hold Lumber/Pelvic belt or head halter.
• Nylon Rope: One length, suitable for tractions.
• Weights: 20Kg, in 20 plates of One Kg. each with carrier.
• Finish: All metal parts & plates with Powder coated finish.